Real decibel readings
See your live, peak and average level in dB, so you know if your voice is too quiet, just right or clipping.
Free · Private · Nothing is recorded to a server
Find out in seconds if your microphone works. This mic test shows a live level meter in decibels and a sound wave, lets you switch devices, record and play back a clip, and test your left and right speakers. Everything stays on your device.
Input level
–∞ dB
Sound view
The full list of devices appears after you allow access.
Turn these off to hear your raw microphone, as recording apps do.
Record and play back
Start the test to record a short clip and hear how you sound.
Speaker test
Device details
Most microphone testers only wiggle a bar. This one gives you real numbers, lets you hear yourself, and helps you fix problems.
See your live, peak and average level in dB, so you know if your voice is too quiet, just right or clipping.
Watch your voice as a live waveform or frequency spectrum, with your main pitch shown in hertz.
Record a 10-second clip, listen to how you really sound and download it to share with support.
Pick any connected microphone and turn noise suppression, echo cancellation and auto gain on or off.
Play a short tone in each ear to check your headphones or speakers are wired the right way round.
Audio is analysed in your browser and never sent anywhere. Recordings stay on your device until you close the page.
It takes less than a minute.
Press the green microphone button and choose Allow when your browser asks for microphone access.
Talk at your usual volume. The meter should move and the badge will say your microphone is working.
Aim for peaks between about -20 and -6 dB while speaking. Lower is too quiet, higher may distort.
Record a short clip and play it back to hear your real sound quality, background noise and echo.
The meter shows level in dBFS, where 0 dB is the loudest possible signal. Values are approximate and depend on your device and settings.
| Level | What it means | What to do |
|---|---|---|
| Below -50 dB | Silence or a very quiet room | If you are speaking, the mic may be muted or the wrong device |
| -50 to -30 dB | Quiet voice or distant microphone | Move closer or raise the input volume |
| -30 to -12 dB | Normal speech | Good for calls and meetings |
| -12 to -3 dB | Loud, clear voice | Ideal peak range for recording |
| Above -3 dB | Very loud, close to clipping | Lower the input volume to avoid distortion |
Most problems come from blocked permissions or the wrong input device.
Open Settings, then Privacy and security, then Microphone. Turn on Microphone access and Let apps access your microphone. Then go to System, Sound and choose the right input device.
Open System Settings, then Privacy and Security, then Microphone, and switch on your browser. In Sound, open Input and pick your microphone.
Click the icon at the left of the address bar, set Microphone to Allow and reload the page.
In Firefox, click the permissions icon in the address bar and clear the block. In Safari, open Settings for this website and set Microphone to Allow.
Tap the icon beside the address bar and allow the microphone. If it is still blocked, open Settings, Apps, your browser, Permissions, Microphone.
For Safari, open Settings, Apps, Safari, Microphone and choose Allow or Ask. For other browsers, open that app in Settings and turn on Microphone.
Press the microphone button, allow access and speak. If the level meter moves and the badge says your microphone is working, it is picking up sound. Record a clip to check the quality.
Yes. Your audio is processed only in your browser. Nothing is uploaded or saved on a server, and the microphone turns off as soon as you stop the test or close the page.
The wrong microphone may be selected, the mic may be muted, or the browser may not have permission. Choose another device in the list and check the troubleshooting steps above for your system.
For speech, peaks between about -20 and -6 dB are ideal. Peaks near 0 dB can distort, and levels below -40 dB usually sound too quiet.
Keep it on for calls in noisy rooms. Turn it off when recording music or when you want to hear the raw sound of your microphone.
Yes. Connect the headset, press start and pick it from the Microphone list. Bluetooth headsets may switch to a lower-quality call mode while the mic is active, which is normal.
Yes. It works in modern browsers on Android and iPhone. Allow microphone access when asked, and use the speaker test with headphones plugged in.
The recording includes the processing you chose, such as noise suppression and auto gain. Try turning them off and recording again to compare.
Press start, speak and see your level in seconds. Free, private and ready before your next call.
Open the mic test